Over my many years of consulting with customers on jobs, I have pumped, shot, spilled, splashed, sprayed, poured and injected polyurethane foam into every imaginable type of concrete structure known to man. Most of it has ended up where it was supposed to go. But some of it did not.

Some of it ended up on my clothes, my skin, and my hair. That never bothered me (well, maybe the resin on that brand new button down shirt bothered me a little). What is really frustrating is when it stains the concrete you are trying to fix. Your job is to repair something for your customer, and if you are not careful, you can make it look worse than before.

A few years ago I asked our chemist to develop a water based solvent for cleaning out two component impingement style injection guns (such as our MixMaster Pro gun). I wanted the product to be water based so that it could be dispensed directly into the environment with no negative effects. I also needed it to be thick enough to push reacting foam out of the gun.

After I saw what he came up with, I realized it could probably be used as a barrier to prevent polyurethane from staining concrete. After a little testing and tweaking, I realized it would work.

AP Flush 125 is a concentrated product that you can mix with 3-5 parts water. It can be sprayed onto concrete, wood, metal, or plastic and creates a barrier layer that prevents polyurethane foam from sticking to and staining the surface. You can brush it on or spray it on with a pump up garden sprayer.

Our AP Lift customers spray it right out of the MixMaster Pro gun onto concrete surfaces as they are moving from injection point to injection point. They also saturate cracks and joints that foam may come out of. This has the dual protection of keeping stains off the concrete and helps reduce binding of the concrete that can impede the lifting process.

On hot, sunny days you may have to apply it again if the water evaporates out of the system, but overall it really works wonders. We have used it on lifting jobs, soil stabilization jobs, and leak seal jobs. Now the spray foam insulation contractors are starting to use it to protect surfaces adjacent to their work areas.

Next time you are using polyurethane foam on or near a surface you don’t want your foam to stick to or stain, try a pail of AP Flush 125. One pail of concentrate can give you up to 25 gallons of protection.

Want more in-depth info on procedures and products?