In today’s blog post I am going to talk about Epicol INJ LV.

What is Epicol INJ LV?

Epicol INJ LV is a low-viscosity, long pot life epoxy resin designed for the structural bonding of cracks and micro cracks in dry or wet concrete. The low-viscosity allows this epoxy resin to deeply penetrate micro cracks and the long pot life allows the material to be injected as a single component. It has good chemical resistance to alkalis, petroleum derivatives, acid, diluted organic acids, salts and other solutions.

What is the installation process for Epicol INJ LV?

I'll briefly outline the installation process for you below, so you have an idea how the product is used. As with all of our products, don't hesitate to call us at 404-618-0438 for assistance.

Preparing the Application Surface

Clean the surface. Install injection ports. Apply a 2 to 3 inch wide band of Epicol T to seal the crack. Allow surface seal to cure prior to injection.

Mixing

Use a mechanical mixer to pre-mix Component A before use. Add the full amount of Component B and mix at 300 RPM for 3 minutes or until the mixture is homogeneous. Scrape the sides and the bottom of the container as you mix.

When Injecting Into Concrete

Epicol INJ-LV can be injected with a low pressure pump. The injection starts at the lowest point for vertical applications and at the smallest crack for horizontal ones. Start the injection at the first port. Inject the crack until the resin reaches the next port and repeat this procedure until the crack is completely filled. Never mix more resin than can be used within the pot life. Rinse the pump with a solvent. After one day the ports can be removed.

Use

Epicol INJ-LV can be mechanically loaded after 48 hours

Want more information on Alchemy-Spetec structural repair products?